|
■藤井研究室の成果発表 |
|
(1) 加藤洋治，藤井雄作，山口一，宮永大，”高粘性流体の吹き出しによる摩擦抵抗低減”, 日本造船学会論文集, Vol. 168, pp.39-50, 1990. (2) 藤井雄作，加藤洋治，山口一，宮永大，”高粘性流体の吹き出しによる摩擦抵抗低減（第２報）”, 日本造船学会論文集, Vol. 170, pp.45-54, 1991. (3) H. Kato, Y. Fujii, H.
Yamaguchi and M. Miyanaga, “Frictional drag
reduction by injecting high-viscosity fluid into turbulent boundary layer”, ASME
J. Fluid Eng., Vol.115, pp.206-212, 1993. (4) Y. Fujii, H. Matsumoto and I. Fujima, “Measurement of long gauge blocks using
fringe-counting interferometer and subgauge blocks
with lines”, Metrologia, Vol.33,
pp.41-48, 1996. (5) Y. Hoshi, M. Kitahama, M. Okada, H. Yoneda,
H. Shiomi and Y. Fujii, “Automatic width control
system using interstand tension in hot strip
finishing mill”, La Revue de Metallurgie-CIT,
Vo.93, No.11, pp.1413-1420, 1996. (6) Y. Fujii, F. Shiota, Y. Miki, Y. Nezu, T. Makishita and K. Hara, “A buoyancy-free mass comparator
with precision better than 10-6 for use in a superconducting
magnetic levitation system”, IEEE
Trans. Instrum. Meas., Vol. 46, No. 2, pp.
609-612, 1997. (7) Y. Fujii, F. Shiota, Y. Miki, K. Nakayama and T. Morokuma,
“Vertical displacement determination of a levitated superconducting
mass", IEEE Trans. Instrum. Meas., Vol. 48, No. 2, pp.200-204, 1999. (8) Y. Fujii, H. Fujimoto and S. Namioka, “Mass measurement under weightless conditions”, Rev. Sci. Instrum.,
Vol. 70, No.1, pp.111-113, 1999. (9) Y. Fujii and H. Fujimoto,
“Proposal for an impulse response evaluation method for force transducers”, Meas. Sci. Technol., Vol. 10, No.4 pp. N31-N33, 1999. (10) Y. Fujii and H. Fujimoto,
“Measurements of frictional characteristics of a pneumatic linear bearing”, Meas. Sci. Technol., Vol.10, No.5, pp.362-366, 1999. (11) Y. Fujii, Y. Miki, F. Shiota and R. Watanabe, “Liquid helium transfer using a
mass-flow controller", Rev.
Sci. Instrum., Vol. 70, No.10,
pp.4110-4113, 1999. (12) Y. Fujii, K. Ogushi and T. Tojo, “A proposal for a dynamic-response-evaluation
method for torque transducers”, Meas.
Sci. Technol, Vol.10, No.12, pp. N142-N144,
1999. (13) F. Shiota,
Y. Miki, Y. Fujii, T. Morokuma and Y. Nezu, "Evaluation of equilibrium trajectory of
superconducting magnetic levitation system for the future kg unit of mass”, IEEE Trans. Instrum.
Meas., Vol. 49, No.5, pp.117-1121, 2000. (14) Y. Fujii, (15) Y. Fujii, D. Isobe, S. Saito,
H. Fujimoto and Y. Miki, “A method for determining the impact force in crash
testing”, Mech. Syst. Signal Pr.,, Vol.14, No.6, pp.959-965,
2000. (16) Y. Fujii, “Possible
application of mass levitation to force measurement”, Metrologia,
Vol.38, No.1, pp.83-84, 2001. (17) Y. Fujii, Y. Miki, F. Shiota and T. Morokuma,
“Mechanism for levitated superconductor experiment”, IEEE Trans. Instrum. Meas., Vol.50, No.2, pp.580-582, 2001. (18) Y. Fujii, H. Fujimoto, R.
Watanabe, Y. Miki, “Balance for measuring mass under microgravity
conditions”, AIAA Journal, Vol.39, No.3, pp.455-457, 2001. (19) 磯部大吾郎, 藤井 雄作，斎藤 聡，“エアスライド型衝突試験機による動荷重計測値の実験的および解析的評価”，日本機械学会論文集 (A編), Vol.67, No.657, pp.799-806,
May, 2001. (20) Y. Fujii, “Measurement of
impulse response of force transducers”, Rev. Sci. Instrum., Vol.72, No.7, pp. 3108-3111, 2001. (21) 藤井雄作，“マイクログラビティ環境下における質量測定法 ― 被測定物が剛体でない場合に関する検討 ―”，計測自動制御学会論文集，Vol.38, No.4, pp.337-344, 2002. (計測自動制御学会 論文賞・蓮沼賞 受賞) (22) Y. Fujii, “Dynamic three-point
bending tester using inertial mass and optical interferometer”, Optics and
Lasers in Engineering, Vol.38, No.5, pp.305-318, 2002． (23) Y. Fujii, “Evaluation of
impulse response of commercial force transducers”, Measurement,
Vol.33, No.1, pp.35-45, 2003． (24) Y. Fujii, “Measurement of
steep impulse response of a force transducer”, Meas. Sci. Technol.,
Vol. 14, No.1 pp. 65-69, 2003. (25) Y. Fujii, “Measurement of
force acting on a moving part of a pneumatic linear bearing”, Rev. Sci. Instrum.,
Vol.74, No.6, pp.3137-3141, 2003. (26) Y. Fujii,
“A method for calibrating force transducers against oscillation force”, Meas. Sci. Technol., Vol. 14, No.8, pp. 1259-1264,2003. (27) Y.
Fujii, “Proposal for a step response evaluation method for force
transducers”, Meas. Sci. Technol., Vol. 14, No.10, pp.
1741-1746, 2003 (28) Y. Fujii and T. Yamaguchi,
“Method for evaluating material viscoelasticity”, Rev. Sci. Instrum., Vol.75, No.1, pp.119-123, 2004. (30)
山口誉夫，中原直人，永井健一，丸山真一，藤井雄作，"ＦＥＭによる非線形ばねで支持された複数の弾性ブロックの共振応答解析 (弱非線形を有する場合の検討)"，日本機械学会論文集 (C1編), Vol.70 No.696, pp.39-47,
2004. (31)
Y. Fujii and T. Yamaguchi, “Optical method for evaluating
material friction”, Meas. Sci. Technol., Vol. 15, No.10, pp.
1971-1976, 2004. (32)
Y. Fujii, N. Yoshiura and N. Ohta, "Creating a worldwide
community security structure using individually maintained home computers:
The e-JIKEI Network Project", Social Science Computer Review,
Vol.23, No.2, pp. 250-258, 2005. (33)
Y. Fujii, “Microforce materials
tester”, Rev. Sci. Instrum. Vol.76,
No.6, 065111-1-7, 2005. (34)
Y. Fujii and T. Yamaguchi, ”Proposal for material
viscoelasticity evaluation method under impact load ”, Journal of
Materials Science, Vol.40, No.18, pp.4785 – 4790, 2005. (35)
Y. Fujii, N. Yoshiura and N. Ohta, " Community security by
widely available information technology”, Journal
of Community Informatics, Vol. 2, No. 1, 2006. (37)
Y. Fujii, “Optical method for accurate force measurement:
dynamic response evaluation of an impact hammer”, Opt. Eng.,
Vol. 45, No. 2, 023002-1-7, 2006. (38)
山口誉夫，中原直人，永井健一，丸山真一，藤井雄作，“基準座標で記述されたFEMを用いた非線形集中ばね＋弾性ブロックの振動解析(非線形復元力が相対変位の関数になる場合)”，日本機械学会論文集 (C編) , Vol.72 No.714, pp.324-331,
2006. (39)
Y. Fujii, “Pendulum for precision force measurement”, Rev.
Sci. Instrum., Vol. 77, No.3, 035111-1-5,
2006. (40)
Y. Fujii and J. Valera, “Impact force measurement using an
inertial mass and a digitizer”, Meas. Sci. Technol., Vol.17,
No.4, pp. 863-868, 2006. (42)
Y. Fujii, T. Yamaguchi and J. Valera, “Impact response
measurement of a human arm”, Experimental Techniques, Vol.30,
No.3, pp.64-68, 2006. (43)
Y. Fujii, “Method of evaluating the dynamic response of
materials to forced oscillation”, Meas. Sci. Technol., Vol.17,
No.7, pp. 1935-1940, 2006. (44)
Y. Fujii, “Frictional characteristics of an aerostatic linear
bearing”, Tribol. Int.,
Vol.39, No.9, pp.888-896, 2006. (45)
Y. Fujii and T. Yamaguchi, “Method of evaluating the force
controllability of the human finger”, IEEE Trans. Instrum.
Meas., Vol.55, No.4, pp.1235-1241, 2006. (46)
T. Yamaguchi, Y. Fujii, K. Nagai and S. Maruyama, “FEA for
vibrated structures with non-linear concentrated spring having hysteresis”, Mech.
Syst. Signal Pr., Vol.20, No.8, pp.1905-1922, 2006. (47)
Y. Fujii and K. Shimada, “Instrument for measuring the mass of
an astronaut”, Meas. Sci. Technol., Vol.17, No.10,
pp.2705-2710, 2006. (48)
Y. Fujii, “Measurement of the electrical and mechanical
responses of a force transducer against impact forces”, Rev. Sci. Instrum., Vol.77, No.8, 085108-1-5, 2006. (49)
Y. Fujii and T. Yamaguchi, “Dynamic characteristics measurements
of a car wiper blade”, JSME Int. J. C, Vol.49, No.3,
pp.799-803, 2006. (50)
H. Ueda, Y. Fujii, S. Kumakura, N.
Yoshiura and N. Ohta, "e-JIKEI Network Project/ (51)
Y. Fujii, “Possible applications of the Levitation Mass Method
to precision mechanical measurements”, J. Chinese S. Mech. Eng.,
Vol.27, No.5, pp.519-523, 2006. (52)
Y. Fujii, “Method for correcting the effect of the inertial mass
on dynamic force measurements”, Meas. Sci. Technol., Vol.18,
No.5, pp.N13-N20, 2007. (53) Y. Fujii, “Impact response
measurement of an accelerometer”, Mech. Syst.
Signal Pr., Vol.21, No.5, pp.2072-2079, 2007. (54) Y. Fujii, “Microforce materials tester based on the levitation
mass method”, Meas. Sci. Technol., Vol.18,
No.6, pp.1678-1682, 2007. (55) 伊藤瞳，藤井雄作，“浮上質量法を応用した手のひらの力学特性評価”，電気学会論文誌A, Vol.127-A, No.6, pp.297-302,
2007. 転載：H. Ito and Y. Fujii, “Evaluation of Mechanical Response of Human
Palm to Small Impact Force”, Electronics and Communications in Japan,
Vo.92, No.1, pp.18-23, 2009. (56) Y. Fujii, “Method
of generating and measuring static small force using down-slope component of
gravity”, Rev. Sci. Instrum.,
Vol.78, No.6, 066104-1-3, 2007. (57) Y. Fujii, “Method for measuring transient friction coefficients for rubber
wiper blades on glass surface”, Tribol. Int.,
Vol.41, No.1, pp.17-23, 2008. (58) Y. Fujii and D.W. Shu, “Impact
force measurement of an actuator arm of a hard disk drive”, Int. J. Impact Eng., Vol.35, No.2, pp.98-108, 2008. (59)
Y. Fujii and K. Shimada, “The space scale: An Instrument for astronaut mass measurement”, Trans.
Jpn. Soc. Aeronaut. Space Sci.,
Vol.50, No.170, pp.251-257, 2008. (60) S. Hashimoto and Y. Fujii, “Material tester using a controlled oscillator and an
inertial mass”, Key Engineering Materials,
Vols. 381-382, pp 457-460, 2008. (61) K. Shimada and Y. Fujii,
“Reconsideration of body mass measurement on the International Space Station
and beyond”, Key Engineering Materials, Vols. 381-382, pp
461-464, 2008. (62) Y. Fujii, K. Shimada, M.
Yokota, S. Hashimoto, Y. Sugita and H. Ito, “Mass
measuring instrument for use under microgravity conditions”, Rev.
Sci. Instrum., Vol.79, No.5, 056105-1-3,
2008. (63) Y. Fujii, “The Levitation Mass
Method: A precision mass and force measurement technique”, International Journal of Precision Engineering and
Manufacturing, Vol.9, No.3, pp.46-50, 2008. (64) M. Parlapalli,
B. Gu, D.W. Shu and Y. Fujii, “Dynamic
Response Measurement of the Head Arm Assembly of a Hard Disk Driveby Numerical Analysis and Experiments”, International
Journal of Precision Engineering and Manufacturing, Vol.9, No.4,
pp.22-25, 2008. (65) Y. Fujii, N. Ohta, H. Ueda, Y.
Sugita and K. Maru, “New concept regarding management of
security cameras”, Journal of Community
Informatics, Vol. 4, No. 3, 2008. (66) 伊藤瞳，藤井雄作，山口誉夫，杉田陽市，横田正幸，“振子機構を用いた材料試験”，電気学会論文誌E, Vol.129, No.1, pp.22-28,
2009. (67) Y. Fujii, “Toward dynamic force calibration”, Measurement, Vol.42, No.7, pp.1039-1044, 2009． (69)
K. Maru and Y. Fujii, “Wavelength-insensitive laser Doppler velocimeter using beam position shift induced by Mach-Zehnder interferometers”, Optics Express, Vol.17,
No.20, pp.17441-17449, 2009. (70)
K. Maru and Y. Fujii, “Reduction of chromatic
dispersion due to coupling for synchronized-router-based flat-passband filter
using multiple-input arrayed waveguide grating,” Optics Express, Vol.17, No.24, pp.22260-22270, 2009. (71)
Y. Fujii and J. P. Hessling,
“Frequency estimation method from digitized waveform”, Experimental
Techniques, Vol.33, No.5, pp.64-69, 2009. (72)
F. H. Suhailin, J. Ali, P. P. Yupapin,
Y. Fujii, H. Ahmad, and S. W. Harun, “Stopping and storing light pulses
within a fiber optic ring resonator”, Chinese Optics Letters, Vol. 7,
No.9, pp.778-780, 2009. (73)
Y. Fujii, “Toward establishing dynamic
calibration method for force transducers”, IEEE Trans. Instrum. Meas., Vol.58, No.7, pp.2358-2364, 2009. (74)
太田直哉，藤井雄作，伊藤直史，“白黒監視カメラからの色情報の復元”，電子情報通信学会論文誌Ｄ, Vol.J92-D, No.6, pp.888-896, 2009. (75)
B. Gu, D. Shu, Y. Fujii and B. Shi,
“Dynamic force measurement of a head arm assembly of a hard disk drive by
numerical analysis and experiments”, IEEE Trans. Magnetics, Vol.45,
No.11, pp.5034-5037, 2009. (76)
K. Maru and Y. Fujii, “Integrated wavelength-insensitive
differential laser Doppler velocimeter using planar
lightwave circuit”, Journal of Lightwave
Technology, Vol.27, No.22, pp.5078-5083, 2009. (77)
Y.Fujii, K. Shimada, K. Maru, M. Yokota, S. Hashimoto, N.
Nagai and Y. Sugita, “Instrument for Measuring the Body Mass of Astronaut”, Trans. Jpn. Soc. Aeronaut. Space Sci. Space
Technol. Jpn., Vol.7, Th_1-Th_6,
2009. (78)
Y. Fujii, P. Yupapin and N.
Pornsuwancharoen, “A proposal of a high resolution tunable laser source
generation”, Microwave and Optical Technology Letters, Vol.52, No.2,
pp.406-408, 2010. (79)
Y. Fujii and K. Maru, “Optical method for evaluating dynamic
friction of a small linear ball bearing”, Tribology
Transactions, Vol. 53, No. 2, pp.169-173, 2010. (80)
丸浩一，藤井雄作，杉田陽市，太田直哉，吉浦紀晃，上田浩，白木慎也，“利他主義と情報技術による地域社会の安全化 e自警ネットワーク実現に向けたシステムの導入と展望”，建築学会総合論文誌，No.8, pp.99-104, 2010.
(81)
山口誉夫，金井知幸，藤井雄作，永井健一，丸山真一，“衝撃荷重を受ける腕の動的応答の数値解析”，日本機械学会論文集 (C編) , Vol.76 No.772, pp.192-198,
2010. (82)
K. Maru, K. Kobayashi, and Y. Fujii, “Multi-point differential laser
Doppler velocimeter using arrayed waveguide
gratings with small wavelength sensitivity,”Optics Express, Vol. 18, No. 1, pp. 301-308, Jan. 2010. (83)
Y. Fujii, K. Shimada and K. Maru, “Instrument for measuring the
body mass of astronauts under microgravity conditions”, Microgravity
Science and Technology, Vol. 22, No. 1, pp. 115-121, 2010. (84)
T. Yamaguchi and Y. Fujii, “Dynamic analysis by FEM for a
measurement system to observe viscoelasticity using levitation mass method”, International
Journal of Advanced Manufacturing Technology, Vol. 46, No. 9-12, pp.
885-891, 2010. (85)
T. Jin, H. Jia, W. Hou,
R. Yamamoto, N. Nagai, Y. Fujii, "Extracting a circle and its center in
a moving dummy mass", Electronics World, Vol.116,
pp.22-25, 2010. (86)
Y. Fujii, K. Maru, K. Kobayashi, N. Yoshiura, N. Ohta, H. Ueda
and P. Yupapin, “e-JIKEI Network using e-JIKEI
Cameras: Community security using considerable number of cheap stand-alone
cameras”, Safety Science, Vol.48, No.7, pp.921-925, 2010. (87)
Y. Fujii, K. Maru and T. Jin, “Method for evaluating the
electrical and mechanical characteristics of a voice coil actuator”, Precision
Engineering, Vol.34, No.4, pp.802-806, 2010. (88)
Y. Fujii, K. Shimada, K. Maru, J. Ozawa and R. Lu, ” A method for direct measurement of the first-order mass moments
of human body segments”, Sensors, Vol.10, No.10,
pp.9155-9162, 2010. (89)
(90)
K. Shimada and Y. Fujii, “Issues with Body Mass Measurement on
the International Space Station (ISS)”, Applied Mechanics and Materials,
Vol.36, pp.9-20, 2010. (91)
Y. Fujii, K. Maru, K. Shimada, T. Jin and (92)
Y. Fujii, K. Maru, T. Jin and T. Yamaguchi, “Precision Force
Measurement Using the Levitation Mass Method (LMM)”, Applied Mechanics and Materials,
Vol.36, pp.41-51, 2010. (93)
B. Gu, D. W. Shu, Y. Fujii and B. J.
Shi, “Dynamic Response Measurement of 1-Inch HDD Head Arm Assembly”, Applied
Mechanics and Materials, Vol.36, pp.52-56, 2010. (94)
M. Jamsai, H. Ebara, N.
Pornsuwancharoen, K. Maru and Y. Fujii, “Precision Force Measurement Using
Small Pendulum and Optical Interferometer”, Applied Mechanics and Materials,
Vol.36, pp.199-204, 2010. (95)
T. Yamaguchi, Y. Fujii, T. Kanai, K. Nagai and S. Maruyama,
“Numerical Simulation of Impact Responses for an Elastic Structure with a
Viscoelastic Spring Including Nonlinear Hysteresis Damping”, Applied
Mechanics and Materials, Vol.36, pp.205-209, 2010. (96)
T. Yamaguchi, Y. Fujii, T. Fukushima, T. Kanai, K. Nagai and S.
Maruyama, “Dynamic Responses for Viscoelastic Shock Absorbers to Protect a
Finger under Impact Force”, Applied Mechanics and Materials,
Vol.36, pp.287-292, 2010. (97)
K. Maru and Y. Fujii, “Laser Doppler Velocimetry Using
Integrated Waveguide Technology”, Applied Mechanics and Materials,
Vol.36, pp.323-328, 2010. (98)
K. Maru and Y. Fujii, “Proposal of Compact Optical System Using
Planar Lightwave Circuit for Precision Measurement Based on Levitation Mass
Method”, Applied Mechanics and Materials, Vol.36, pp.329-336, 2010. (99)
T. Jin, H. Z. Jia, W. M. Hou, R. Yamamoto, N. Nagai, Y. Fujii, K. Maru, N. Ohta
and K. Shimada, “Motion Pose Estimated Based on the Binocular Stereo Camera”,
Applied
Mechanics and Materials, Vol.36, pp.494-496, 2010. (100)
T. Jin, H. Jia, W. Hou,
R. Yamamoto, N. Nagai, Y. Fujii, K. Maru, N. Ohta, and K. Shimada,
“Evaluating 3D position and velocity of subject in parabolic flight
experiment by use of the binocular stereo vision measurement”, Chinese
Optics Letters, Vol.8, No.6, pp.601-605, 2010. (101)
K. Maru and Y. Fujii, "Differential laser Doppler velocimeter with enhanced range for small wavelength
sensitivity by using cascaded Mach-Zehnder
interferometers," J. Lightwave Technol., Vol. 28,
No. 11, pp. 1631-1637, 2010. (102)
N. Pornsuwancharoen, Y. Fujii, K. Srinuanjan,
P.P. Yupapin, “A novel system of the simultaneous
trapping of dark–bright solitons within a nano-waveguide
system”, Optik, Vol.121, No.20,
pp.1863-1868, 2010. (103)
V. Prashyanusorn, Y. Fujii, S. Kaviya, S. Mitatha, P. Yupapin,
“Sustainable tourism using security cameras with privacy protecting ability”,
Journal
of Information Security, 2010, Vol.1, No.2, pp.67-72, 2010. (104)
Y. Fujii, K. Maru, T. Jin, P. Yupapin
and S. Mitatha, ”A method for evaluating dynamical friction in linear ball
bearings”, Sensors, Vol.10, No.11,
pp. 10069-10080, 2010. (105)
K. Maru, W. Khunnam, L.Y. Hu, R.S. Lu, P. Yupapin
and Y. Fujii, “Tilt mechanism for precision control of down-slope component
of gravitational force for micro force generation”, Key Engineering
Materials, Vols. 459, pp. 179-182, 2011. (106)
J. Ozawa, K. Maru, K. Kobayashi and Y. Fujii, “Microforce material tester using small pendulum”, Key
Engineering Materials, Vols. 459, pp. 183-189, 2011. (107)
K. Maru and Y. Fujii, "Laser Doppler velocimetry for
two-dimensional directional discrimination by monitoring scattered beams in
different directions," IEEE Sens. J., Vol.11, No.2,
pp.312318, 2011. (108)
K. Maru, L. Y. Hu, R. S. Lu, Y. Fujii, and P. P. Yupapin, "Two-dimensional laser Doppler velocimeter using polarized beams and 90o phase shift for
discrimination of velocity direction," Optik,
Vol.122, No.11, pp. 974977, 2011. (109)
Y. Fujii and K. Maru, “Self-correction method for dynamic
measurement error of force sensors”, Experimental
Techniques, Vol.35, No.3, pp.15-20, 2011. (110)
K.Kurita, Y. Fujii, K. Shimada, “A new technique for touch
sensing based on measurement of current generated by electrostatic
induction”, Sensors and Actuators A: Physical, Vol.170, No.1-2, pp.66-71,
2011. (111)
A. Takita, H. Ebara, Y. Fujii, “Dual beat-frequencies laser
Doppler interferometer”, Rev. Sci. Instrum.,
Vol.82, 123111, 2011. (112)
Y. Fujii, A. Takita, J. Kaewkhao, M. Djamal, “Precision force
measurement using the Levitation Mass Method (LMM)”, Applied Mechanics and Materials,
Vol.103, pp.1-8, 2011. (113)
K. Shimada, Y. Fujii, “Proposal of intelligent inventory system
for space station with IC tag - Near real-time onboard inventory management
-”, Applied Mechanics and Materials, Vol.103, pp.68-70, 2011. (114)
K. Maru and Y. Fujii, “Laser Doppler velocimetry with small
wavelength sensitivity using planar lightwave
circuit”, Applied Mechanics and Materials, Vol. 103, pp. 76-81, 2011. (115)
J. Ozawa, A. Takita, T. Azami and Y. Fujii, “Microforce
material tester using small pendulum II”, Key Engineering Materials,
Vol.497, pp.169-175, 2012. (116)
H. Ebara, A. Takita, T. Azami and Y. Fujii, “Development of
material tester using pendulum”, Key Engineering Materials,
Vol.497, pp.176-181, 2012. (117)
T. Jin, A. Takita, M. Djamal, W. Hou,
H. Jia and Y. Fujii, “A method for evaluating the
electro-mechanical characteristics of piezo-electric actuators during
motion”, Sensors, Vol.12, No.9, pp.11559-11570, 2012. (118)
T. Yamaguchi, Y. Fujii, A. Takita and T. Kanai, “FEA for
transient responses of an S-shaped force transducer with a viscoelastic
absorber using a nonlinear complex spring”, World Academy of Science,
Engineering and Technology, Vol. 71, No.11, pp.802-809, 2012. (119)
T. Jin, A. Takita, S. Mitatha, P. P. Yupapin,
H. Z. Jia, W. M. Hou and
Y. Fujii, “Method for acceleration measurement using a laser Doppler
interferometer”, Meas. Sci. Technol., Vol. 24, No.7, 077001, 2013. (120)
T. Jin, K. Watanabe, I. Aji, A. Takita, S. Mitatha, M. Djamal,
H. Z. Jia, W. M. Hou and
Y. Fujii, “High-speed impact test using an inertial mass and an optical
interferometer”, Rev. Sci. Instrum.
Vol.84, 075116, 2013. (121)
T. Yamaguchi, Y. Fujii, T. Fukushima, N. Tomita, A. Takita, K.
Nagai and S. Maruyama, “Damping response analysis for a structure connected
with a nonlinear complex spring and application for a finger protected by
absorbers under impact forces”, Mech. Syst. Signal Pr., Vol.42,
No.1-2, pp.88-96, 2014. (122)
M. Djamal, K. Watanabe, K. Irisa, I. A. Prayogi, A. Takita, T.
Yamaguchi and Y. Fujii, “Dynamic characteristics measurements of a force
transducer against small and short-duration impact forces”, Metrology
and Measurement Systems, Vol. 21 , No. 1, pp. 59–66, 2014. (123)
K. Muramatsu, M. Ishizawa, A. Takita, N. Yoshiura, N. Ohta, K.
Maru, H. Ueda and Y. Fujii, “Shopping street safety using all-in-one-type
security cameras”, ICIC Express Letters, Vol.8,
No.11, pp.3001-3006, 2014. (124)
A. Takita, Y. Ono and Y. Fujii, “Review of dynamic force
correction method for a force transducer with the Levitation Mass Method”, Information,
Voi.17, No.2, pp.539-544, 2014. (125)
R. Araki, K. Irisa, K. Watanabe, N. Miyashita, A. Takita and Y.
Fujii, “The dynamic characteristics of gelled food materials against small
impact force”, Journal of the Institute of Industrial Applications Engineers,
Vol.2, No.1, pp.19-23, 2014. (126)
J. Pastoril, K. Watanabe, K. Irisa, I. Prayogi, A. Takita, E.
Carcasona and Y. Fujii, “Determination of reaction force in a toothbrush tuft
using Levitation Mass Method (LMM)”, Journal of the Institute of Industrial
Applications Engineers, Vol.2, No.2, pp.48-53, 2014. (127)
R. Araki, A. Takita, T. Ishima, H.
Kawashima, N. Pornsuwancharoen, S. Punthawanunt, E. Carcasona, and Y.Fujiii, “Impact force measurement of a spherical body
dropping onto a water surface”, Rev. Sci. Instrum.,
Vol.85, 075108, 2014. (128)
N. Miyashita, K. Watanabe, K. Irisa, H. Iwashita, R. Araki, A.
Takita, T. Yamaguchi and Y. Fujii, “Software for correcting the dynamic error
of force transducers” Sensors, Vol.14, No.7,
pp.12093-12103, 2014. (129)
M. Djamal, I. A. Prayogi, K. Watanabe, A. Takita and Y. Fujii,
“New method for evaluating dynamic characteristics of cantilever spring of
vibration sensor”, Advanced Materials Research,
Vol.1025-1026, pp.372-378, 2014. (130)
伊藤聖人，伊藤直史，太田直哉，藤井雄作，“位置依存PSFをもつ撮像系からの劣化画像の復元”，計測自動制御学会論文集，Vol.50, No.9, pp.662-668,
2014. (131)
N. Miyashita, R. Araki, A. Takita, T. Yamaguchi, A. S. Budi and
Y. Fujii, “Improvement of software for dynamic force correction of force
transducers”, J. Inst. Ind. Appl. Eng., Vol.2, No.4, pp.131-136, 2014. (132)
R. Araki, A. Takita, T. Ishima, E.
Carcasona and Y. Fujii, "Impact force measurement of a spherical body
dropping onto a water surface from different heights", J.
Inst. Ind. Appl. Eng., Vol.2, No.4, pp.137-142, 2014. (133)
T. Jin, H. Jia. W. Hou
and Y. Fujii, “A measurement of human body rotation during parabolic flight
experiment”, Aircr. Eng. Aerosp.
Technol., Vol. 87, No.1, pp.79-82, 2015. (134)
K. Kitabata, H. Iwashita, A. Takita, M. Djamal, N.
Pornsuwancharoen and Y. Fujii, “Frictional characteristics measurement of a
ceramic aerostatic linear bearing”, Key Engineering Materials,
Vol.643, pp.167-172, 2015. (135)
K. Watanabe, N. Miyashita, D. Bin, K. Irisa, A. Takita, T.
Yamaguchi, E. Carcasona, S. Mitatha and Y. Fujii, “Impact response
measurement of contact lenses”, Key Engineering Materials,
Vol.643, pp.173-178, 2015. (136)
R. Araki, A. Takita, P. Nachaisit,
D.W. Shu and Y. Fujii, "Frictional characteristics of a small aerostatic
linear bearing", lubricants, Vol.3, pp.132-141,
2015. (137)
I. Prayogi, K. Watanabe, K. Irisa, A. Takita, M. Djamal and Y.
Fujii, “A method for evaluating the mechanical response of rubber-like
material under small impact loads”, Int. J. of Innovative Computing
Information and Control, Vol.11, No.3, pp949-954, 2015. (138)
Y. Fujii, N. Yoshiura, N. Ohta, A. Takita, H. Ueda and K. Maru,
“Abuse Prevention of Street Camera Network by Browsing-History Disclosure”, Journal
of Community Informatics, Vol. 12, No. 1, pp.152-156, 2016. (139)
K. Kitabata, A. Takita, T. Yamaguchi, E. Carcasona, A. S. Budi
and Y. Fujii, "Impact response measurement of a bamboo sword “Shinai”", Journal of the Institute of Industrial
Applications Engineers, Vol.4, No. 2 pp.66-71, 2016. (140)
R. Kojima, K. Kitabata, D. H. Bin, A. Takita, T. Yamaguchi, Y.
Fujii, “Impact Response Measurement of Bamboo Shinai
and CFRP Shinai”, Key Engineering Materials,
Vol. 698, pp. 80-84, 2016. (141)
N. Miyashita, K. Watanabe, A. Takita, M. Djamal, T. Yamaguchi,
Y. Fujii, “Measurement of Dynamic Responses of a Force Sensor against Small
Impact Forces with Various Durations”, Key Engineering Materials, Vol.
698, pp. 73-79, 2016. (142)
K. Suzuki, K. Nakaya, A. Takita, K.
Shimada, Y. Fujii, “Improved Method of Direct Measurement of the First-Order
Mass Moments of Human Body”, Key Engineering Materials, Vol.
698, pp. 69-72, 2016. (143)
Y. Fujii and N. Yoshiura, "Will every streetlight have
network cameras in the near future?", SCIENCE, eLetters (21 October
2016), http://science.sciencemag.org/content/347/6221/504/tab-e-letters (144)
E. Satria, M. Djamal, Hendro, A. Takita, Y. Fujii, “Precision
Measurement of Drag Force Acting on a Spherical Body Dropping in the Air”, Journal
of Technology and Social Science, Vol.1, No.1, pp.7-15, 2017. (145)
T. Yokote, A. Takita, H. Nasbey, A.
Setyobudi, Y. Sugita, S. Hashimoto, M. Yokota, T. Hirose, T. Nakamura and Y.
Fujii, “Precision Measurement of Drag Force Acting on a Spherical Body
Dropping in the Air”, Journal of Technology and Social Science,
Vol.1, No.1, pp.55-60, 2017. (146)
田北啓洋, 村松公祐, 丸浩一, 上田浩, 吉浦紀晃, 太田直哉, 藤井雄作, “防犯カメラ画像の暗号化によるプライバシ保護とセキュリティ確保の両立”, 社会安全とプライバシー, Vol.1, No.1, pp.19-25, 2017. (147)
田北啓洋，村松公祐，丸浩一，上田浩，吉浦紀晃，太田直哉，藤井雄作 , “プライバシに配慮した地域見守り防犯カメラシステムの開発”, 社会安全とプライバシー, Vol.1, No.1, pp.26-31, 2017. 特許 (1) 特許第３２００２２０号，「連続熱間圧延における鋼片の接合方法」，発明者：藤井雄作，竹林克浩，磯辺邦夫，鑓田征雄 (2) 特許第３０３０３０７号，「無重力環境下で動作する質量測定器」，発明者：藤井雄作，藤本弘之 (3) 特許第３０８９２６１号，「角度測定器」，発明者：藤井雄作，塩田ふゆひこ (4) 特許第３１７７６８１号，「力センサーの衝撃応答の評価装置」，発明者：藤井雄作，藤本弘之 (5) United
States Patent (米国特許) US 6,918,304 B2，"Material Testing Method"，発明者：藤井雄作，山口誉夫 (date of patent: Jul. 19, 2005)，特許権者：国立大学法人 群馬大学 (6) European
Patent (欧州特許) EP1531326B1, "Material Testing
Method"， 発明者：藤井雄作，山口誉夫 (date of patent: Feb. 14, 2007) ，特許権者：国立大学法人 群馬大学 (7) 特許第3944558号，「材料試験法」，発明者：藤井雄作，山口誉夫，特許権者：国立大学法人 群馬大学 (8) 特許第5481632号，「監視カメラシステム及びその運用方法」，発明者：藤井雄作，澤野勝利，特許権者：国立大学法人群馬大学，株式会社ロッキー (9) 特許第5286524号，「周波数測定装置及び周波数測定方法」，発明者：藤井雄作，特許権者：国立大学法人群馬大学 (10) 特許第4976389号，「力検出装置及び力センサの受感部の有効慣性質量の算出方法」，発明者：藤井雄作，岡野晴樹，特許権者：国立大学法人群馬大学，株式会社東京測器研究所 (11) 特許第5162732号，「画像閲覧システム」，発明者：藤井雄作，太田直哉，上田浩，杉田陽市，桑原隆能，特許権者：国立大学法人群馬大学，イージケイシステム株式会社 (12) 特許第5757048号，「所有者，画像閲覧可能な者を知らしめる情報開示手段を持つことを特徴とする防犯カメラシステム」，発明者：藤井雄作，吉浦紀晃，特許権者：特定非営利活動法人e自警ネットワーク研究会 (13) 特許第5840804号，「暗号化された画像を閲覧権者に応じた強度の不鮮明化処理を施した画像を出力することを特徴とする画像暗号化システム」，発明者：藤井雄作，吉浦紀晃，特許権者：特定非営利活動法人e自警ネットワーク研究会，株式会社トステック，有限会社マツダ商事，株式会社ミツバアビリティ，桑原電気工事株式会社 3．国際会議，解説，国内学会発表 など 省略． 平成１６年８月 (社)計測自動制御学会 論文賞（・蓮沼賞）受賞（藤井助教授 宛） 平成１７年１月 桐生警察署から「感謝状」（警察業務）を受ける．（藤井助教授 宛） 平成１７年１月 群馬県警察本部から「感謝状」（刑事警察）を受ける．（藤井助教授が会長を務めるe自警ネットワーク研究会 宛） 平成１７年１２月 桐生警察署から「感謝状」（生活安全警察）を受ける．（藤井助教授 宛） 平成１８年１月 群馬県警察本部から「感謝状」（防犯活動）を受ける．（藤井助教授が会長を務めるe自警ネットワーク研究会 宛） 平成１８年２月 横山賞 受賞（藤井助教授 宛） 平成１８年３月 平成１７年度 電気学術女性活動奨励賞 を受賞 （学部４年生（当時）伊藤瞳さん 宛） 平成１８年３月 平成１７年度 群馬大学工業会奨励賞 を受賞 （学部４年生（当時）伊藤瞳さん 宛） 平成１９年９月 ITMPM2007 Best Student Paper Award を受賞 （修士１年生 杉田陽市さん 宛） 平成１９年１０月 3rd ISPS 2007 Mohri Poster
Session Excellent Poster Award を受賞 （修士１年生 杉田陽市さん 宛） 平成１９年１２月 伊勢崎警察署から「感謝状」（生活安全警察）を受ける． 平成２０年１月 桐生警察署から感謝状を受ける（警察活動）． （藤井教授 宛） 平成２０年１月 群馬県警察本部犯罪抑制対策実施本部より「感謝状」を受ける． （藤井教授 宛） 平成２０年１月 群馬県警察本部犯罪抑制対策実施本部より櫻井亮輔君（修士課程１年）が「感謝状」を受ける． 平成２０年１月 群馬県警察本部犯罪抑制対策実施本部より杉田陽市君（修士課程１年）が「感謝状」を受ける． 平成２１年１月 伊勢崎警察署より横手孝君（修士課程１年）が「感謝状」を受ける． 平成２１年２月 ISIDM
2009 Best Paper Award を受賞 （丸 浩一 助教 宛） 平成２１年２月 ISIDM
2009 Best Presentation Award を受賞 （学部４年生 山本亮君 宛） 平成２１年２月 ISIDM
2009 Best Poster Award を受賞 （修士１年生 白木 慎也君 宛） 平成２１年３月 ISQMPM
2009 Best Presentation Award を受賞 （修士２年生 杉田 陽市君
宛） 平成２１年３月 ISQMPM
2009 Best Poster Award を受賞 （修士１年生 長井 教博君 宛） 平成２１年１０月 SPC
2009 Best Paper Award を受賞 （丸 浩一 助教 宛） 平成２１年１０月 SPC
2009 Best Presentation Award を受賞 （修士２年生 長井教博君 宛） 平成２１年１０月 SPC
2009 Best Poster Award を受賞 （修士１年生 星野 仁志君 宛） 平成２１年１２月 前橋警察署から「感謝状」（e自警灯開発）を受ける．（理事長を務めるNPO法人e自警ネットワーク研究会 宛） 平成２２年６月 桐生警察署から「感謝状」（e自警カメラ開発）を受ける．（顧問を務めるイージケイシステム有限会社 宛） 平成２２年６月 桐生警察署から「感謝状」（e自警カメラ開発）を受ける． （藤井教授 宛） 平成２２年６月 桐生警察署から「感謝状」（e自警カメラ開発）を受ける． （植木康夫君（藤井研４年生） 宛） 平成２５年１月 安中警察署から「感謝状」（警察業務）を受ける． （藤井教授 宛） 平成２５年９月 国際会議ICISIP2013において，電気電子工学科4年の新木亮佑君がBest Presentation Awardを受ける． 平成２５年９月 国際会議ICISIP2013において，電子情報・数理教育プログラム修士1年の村松公祐君がStudent Awardを受ける． 平成２５年１１月 タイ王国シリントーン王女から藤井雄作教授が名誉学位（博士）を受ける． 平成２５年１１月 国際会議ICICI-BNE2013 において，Best Paper Awardを受賞 （学部４年生の新木亮佑君宛） |